Charlotte region, NC and SC I-85 I-77 I-40

Request
Menu

I-85

48 x 48 x 48 in gaylord: specs and uses

A 48 x 48 x 48 in gaylord holds about 64 cubic feet on a 48 x 48 inch footprint and one maker rates it at 1,400 lb. The largest standard size here: 64 cubic feet.

What this size is

The largest standard size here: 64 cubic feet. It is a bulky, light-load box, taking the 48 x 48 footprint up to four feet. If your product weighs little for its size, this box saves on pallets and trips.

What goes in it

Foam, packaging, fiber, empty containers, textile waste and film. It suits mills and consolidation docks more than parts plants.

48 in 48 in 48 in
48 x 48 x 48 in, drawn to scale from its dimensions.

The numbers, worked out

MeasureValueHow it is worked out
Footprint48 x 48 in2,304 sq in, 16.00 sq ft
Volume64 cu ft48 x 48 x 48 = 110,592 cubic inches, divided by 1,728 = 64.00 cubic feet
Maker rating, triple wall1,400 lbOne maker's spec page
Rating per cubic foot21.9 lb1,400 / 64
Pallet fitSquare 48 x 48 palletBy footprint

The rating per cubic foot is the heaviest a full box can be and still sit inside the maker's rating, so a load denser than 21.9 pounds per cubic foot should not fill the box to the brim.

On the dock

Fill these to the top with something dense and the lowest wall carries a great deal. Plants that use the cube for light bulk, and fill it to the flaps rather than the weight, get the most from it. A cube of loose fill that has been compressed under its own height is a common reason for a lower grade. A cube, forty-eight inches on every edge, is the largest standard footprint in common use and the one that feels most like a bin. Loaded it is tall enough that a stack of two is rarely safe, and the walls take the strain of whatever settles into the lower half. These boxes are common where plants move light, bulky products such as film, filter media, foam and packing fill.

Writing it into a request

Cubes of this height are often bought in small lots for a single product line. If yours came from one supplier, name the product they held and how many months they have stood, and a buyer with a similar line will know at once whether they match. A buyer will want the wall count first because of the height, so lead with it. After that, describe whether the boxes were stacked while full, how long they stood, and whether the bottoms are flat. Because few plants hold many of this size, a short count is normal, and a short count with clear details is better than a long one without.

Counts and stack heights

Take the 48 x 48 x 48 in box, 48 inches tall, and the example floor of 620 inches by 98 inches on the trucks guide. Set 48 inches along the length and the floor takes 12 by 2, which is 24 boxes; set 48 inches along the length and it takes 12 by 2, which is 24. The two orientations tie, so choose the one that loads and unloads more easily.

One 48 x 48 x 48 in box, 48 inches tall, holds 64 cubic feet, or 110,592 cubic inches. Ten of them hold 640 cubic feet, and a stack of three reaches 144 inches.

BoxesCubic inchesCubic feet
1110,59264
5552,960320
101,105,920640
202,211,8401,280
404,423,6802,560
StackedHeightIn feet
1 high48 in4 ft
2 high96 in8 ft
3 high144 in12 ft
4 high192 in16 ft

Next to its neighbors

SizeVolumeVolume next to this boxRated capacity
48 x 48 x 48 in64 cu ftThis box1,400 lb
48 x 40 x 48 in53.3 cu ft17 percent less than this box1,500 lb
48 x 48 x 36 in48 cu ft25 percent less than this box1,400 lb
48 x 40 x 36 in40 cu ft38 percent less than this box1,500 lb
40 x 40 x 40 in37 cu ft42 percent less than this box1,300 lb

Next to the standard 48 x 40 x 36 box this one holds 60 percent more by volume.

What to watch

One maker rates triple wall at 1,400 lb. Divide that by 64 cubic feet and the permitted fill is light, so do not put a dense load in it.

Walls and bottoms

3‑wall in most stock. Partial flap on a slip sheet. The wall count page has the ranges and the bottom guide shows the difference.

Who asks for it

Textile mills, Scrap and recycling, and Distribution centers are the regional lanes that most often run this footprint. See the industries hub for the rest.

Questions from the dock

How many cubic feet is a 48 x 48 x 48 in gaylord?

About 64. 48 x 48 x 48 is 110,592 cubic inches, and 1,728 cubic inches make a cubic foot.

How much can a 48 x 48 x 48 in gaylord hold?

One maker rates it at 1,400 lb in triple wall. Your box may differ, and a used box is only as good as its condition.

What pallet does a 48 x 48 x 48 in gaylord fit?

Square 48 x 48 pallet. A box that overhangs its pallet loses compression strength, so match them.

Request gaylords or a pickup

Count, footprint and wall count are enough to start.

No prices, minimums or times are stated here.

Request boxes or a pickup